Setting Up The Nursery Unit; Turning On Your Monitor - Angelcare AC027 Owner's Manual

Baby movement monitor

Table of Contents

Available languages

IMPORTANT

• If your crib does not have a solid, stationary, completely flat, firm surface including a spring

or slat base, place a hardboard between the crib base and the Sensor Pad, to ensure correct

operation. The hardboard support must measure at least 30 x 30 cm

(12" x 12") and 6 mm (1/4") thick. This hardboard support must be larger

than the Sensor Pad surface area

• The Sensor Pad functions with standard crib sprung and foam

mattresses and not memory foam (partial or full), hollow frame

construction mattresses and water beds. Please consult Angelcare if

unsure of mattress compatibility. The hardboard maintains a constant

pressure on the Sensor Pad, enabling it to detect the baby's movements even when the baby

is at the edges of the crib

2- SETTING UP THE NURSERY UNIT

Sensor Pad

+ -

Place the

Nursery Unit at least 3

feet (1 meter)

from the crib

Note:

• The Nursery Unit will emit a sound and flash blue

to confirm pairing with the Sensor Pad

• If the green light does not appear but the red

light is flashing; or if there are false alarms,

adjust the sensitivity level (STEP 3, TEST THE

SENSOR PAD)

Table of Contents