Page 1
Angelcare Movement & Sound Monitor AC401 The Quick Set Up Guide can be found on the back page Please check if all parts are present before installing the Angelcare Monitor 4 x rechargeable 1 x Parent 1 x Nursery 2 x AC...
Page 2
Page 2 Congratulations on your purchase of the Angelcare Movement & Sound Monitor AC401. Please use these simple instructions to set up and use your Angelcare baby monitor system. Also available from Angelcare: Sound Only Baby Monitor AC420 Movement Only Monitor AC300...
Getting Started... Page 3 Thank you for choosing an Angelcare Movement and Sound Monitor. We want you to be happy with this monitor and therefore we suggest that you take the time to read through the instructions thoroughly. This will ensure that you set the monitor up to suit your needs.
Page 4
MUTE function (Step 7) 4. SELECT button 2. ARROWS UP/DOWN (to confi rm menu choices - (volume level); also Step 6); also HOLD function (Step 7) CHANNEL button (to change transmission channel - Step 4) Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk...
Page 5
SensorPad can be increased DETECT MOVEMENT 5. Due to the lack of movement, by adjusting the sensitivity (see 1. Make sure the SensorPad is the green PENDULUM light on below) installed correctly and turn both Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk...
Step 5: Testing your Angelcare Monitor (continued) Page 6 6. NEVER USE THE SENSORPAD 7. If the alarm does not sound, (lowest level 1, suitable for WITH A MEMORY FOAM the SensorPad may be detecting smaller beds and if there a MATTRESS! a continuous vibration from (e.g.)
4. Press EXIT if you are In MENU mode appear (ON) fi nished programming (or Sound level 2. Select ON or OFF with the MENU if you would like to ARROWS UP or DOWN go to MENU 3) Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk...
Press EXIT if you are press MENU to set the fi nished programming (or desired lowest temperature MENU if you would like to level (snowfl ake icon will go back to MENU 1) appear) with the ARROWS Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk...
Steps 1 and 5. Avoid contact with the crib when monitor is ON. The SensorPad The Nursery Unit is detecting external movement or alarm does not vibrations when baby’s bed is being touched. go off Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk...
Page 11
Angelcare Monitor has 8 channels. noise coming from The Parent Unit is located near motorized devices, If you have two Angelcare Monitors, ALWAYS ensure that the Parent Unit (e.g. fl uorescent lights, televisions, etc. the channels on both monitors are as far apart as possible, interference from e.g.
Therefore, mildew before cleaning. DO NOT immerse the electrical outlet. build-up could develop underneath in water. Use a dry cloth to keep the mattress in the SensorPad area. monitor free from dust. DO NOT Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk...
Page 16
9. SensorPad socket 10. AC adapter socket 11. SensorPad sensitivity dial 12. Battery compartment 5 Steps to Set-Up Your Angelcare Monitor 1. SensorPad: place the SensorPad 3. Parent Unit: Insert 4 x AAA 5. Test the SensorPad by putting your...
Need help?
Do you have a question about the AC401 and is the answer not in the manual?
Questions and answers