Angelcare AC215 Owner's Manual page 15

6.4 - SCREEN SAVER
Allows you to set the screen saver starting point.
1
2
3 4
ON
20 sec
MANUAL SETTING:
To manually activate the Screen Saver mode press
and hold the Parent Unit VIDEO ON/OFF button.
6.5 - INFRARED NIGHT VISION
Allows you to capture image when lighting
is insufficient.
1
A Night View icon will appear at the top
of the Parent Unit screen.
2
The Night View icon will disappear at the top
of the Parent Unit screen.
6.6 - NIGHT LIGHT
Allows you to use your monitor as a night light.
TO ACTIVATE THE LIGHT:
Push the button on the back of the right "wing"
to turn the Night Light ON or OFF.
6.7 - PAGER
Allows you to locate the Parent Unit.
TO LOCATE PARENT UNIT:
Press the Pager/Hold button for no more
than 2 seconds. The Parent Unit will emit
a paging sound for one minute.
1) Press Menu/Select button to access
main menu.
2) Select the Settings icon to access
sub-menu.
3) Select the Screen Saver icon.
4) Use the up and down arrows to select
timed delay before Video mode turns
into Screen Saver mode.
5) Press Menu/Select button to confirm.
5
NOTE:
The LCD screen will turn black when video is in
Screen Saver mode. Press any button to return
to Video mode.
1) The infrared LEDS will turn ON
automatically when the lighting is not
sufficient, to give a night view on LCD
display.
NOTE:
When the Infrared Night Vision is ON, only
black and white image will be displayed on the
LCD screen.
2) If the light is bright enough in the room,
the infrared LED on the Nursery Unit
will turn OFF automatically.
IMPORTANT
If you press the Pager/Hold
button on the back of the
Nursery Unit for more than
2 seconds, you will put the
movement monitoring on Hold.
To unhold, push the button
again.
E
N
15