Page 1
Baby Video and Sound Monitor Cord Safety Ensure the Camera is at least 1 metre away from your baby’s cot. For assistance, FAQs or guidance with your monitor please visit our Customer Support page at angelcare.co.uk 01mf_Manuel_AC210_EN_UK_12680.indd 1 2017-08-09 11:48 AM...
Page 2
We, at Angelcare ® , stand behind all of our products. If you are not completely satisfied or have any questions, United States and Canada: Please contact us at: angelcare@cdecinc.ca Other countries: Please contact your local distributor. 01mf_Manuel_AC210_EN_UK_12680.indd 2 2017-08-09 11:48 AM...
R E S P O N S I B LE A D U LT S U P ERVI S I O N . This installation. DO NOT short circuit supply terminals. product is designed to aid in the monitoring of Only use the Angelcare provided power adapter your child. When using the monitor, you must to charge the battery. Remove the battery from...
Page 4
16.7 DO NOT attempt to rejuvenate the battery covers (except battery door) may expose you to dangerous voltage or other hazards. provided with or identified for use with this product by heating them. Sudden release of 15.11 Replacement parts - When replacement battery electrolyte may occur, causing burns or parts are required, be sure the replacement parts irritation to eyes or skin.
Model AC210 SETUP REQUIREMENTS Baby Video and Sound Monitor INCLUDED: Parent Unit Camera Tabletop stand (for Camera) 2x AC adapter Lithium ion battery pack (for Parent Unit and Camera) (for Parent Unit) Wall mount (for Camera) (Screwdriver required with hardware for wall mounting) 01mf_Manuel_AC210_EN_UK_12680.indd 5...
STEP 1 - CHARGING THE PARENT UNIT (9 HOURS) 1) Unlock the battery compartment on the rear Battery compartment lock and remove the cover. Insert the provided rechargeable battery into the compartment. Contacts of the battery and the contacts in the compartment must be aligned.
WARNING STRANGULATION HAZARD. Children have STRANGLED in cords: • Keep adapter cords out of the reach of children (more than 1 meter away). • Because of the serious strangulation risk to infants and toddlers, parents and caregivers should never place the Camera within 1 meter of a cot.
1) Press and hold the Parent Unit ON/ OFF button for 2 seconds until LCD screen is turned ON. Angelcare’s logo will be shown for 1 second. 2) Slide the Camera ON/OFF switch to the ON position.
1/3 Full 2/3 Full Full STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR The Angelcare monitor can be used with the pre-program factory ® settings or you can also customize your settings to your preference. Main menu on the LCD display shows the different operation settings.
Page 10
4.1 - SOUND TO ACTIVATE/DEACTIVATE SOUND 1) Press Menu/Select button to access main menu. 2) Select the Sound icon. 3) Use the up and down arrows to activate or deactivate the sound. TO TEST THE SOUND: Ask someone to speak into 4) Press Menu/Select button to confirm.
YOU ARE NOW READY TO USE YOUR MONITOR The Angelcare monitor can be used with the pre-program factory settings ® or you can also customise your settings to your preference. DEFAULT SETTINGS Sound Mode: ON Speaker Volume: Level 3 (of 6)
Page 12
TO ADJUST THE SOUND SENSITIVITY (VOX): Allows you to determine the sound level needed to trigger sound transmission to the Parent Unit. This means that sound will only transmit based on the level that you set. 1) Press Menu/Select button to access the main menu.
Page 13
TO SET THE TEMPERATURE RANGE: 1) Press Menu/Select button to access main menu. 2) Select the Temperature icon to access sub-menu. 3) Select the High Temperature icon to set maximum temperature range (24 to 32 ˚Celsius). ºC 4) Use the up and down arrows to set ºF the highest temperature preferred.
Page 14
5.4 - INFRARED NIGHT VISION Allows you to capture image when lighting is insufficient. 1) The infrared LEDS will turn ON automatically when the lighting is not sufficient, to give a night view on LCD display. A Night View icon will appear at the top of the Parent Unit screen.
Page 15
5.7 - LCD SCREEN BRIGHTNESS Allows you to adjust the LCD screen brightness on the Parent Unit. 1) Use the left and right arrows to adjust the screen brightness level (1 = LOW to 5 = High). 2) A light bulb will be shown on the LCD screen.
TROUBLESHOOTING TAKING CARE OF YOUR RECHARGEABLE BATTERY • Ensure that you fully charge your battery for 9 hours before first use. • To maintain maximum battery life it is recommended that you fully discharge your battery periodically. If your Parent Unit is not in use, please turn it OFF. LOSS OF CONNECTIVITY In the case of loss of connectivity, the first step is to bring the Parent Unit and Camera closer together and make sure that both units are ON to restore the connection.
Page 17
CAMERA POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP • Check connections or change to another electrical outlet. • Slide the Camera ON/OFF switch to the ON position. WEAK RECEPTION • Bring units closer together. • Change the position of one or both units. •...
This warranty does not cover products and Angelcare ® warrants to the original owner of this accessories which are not Angelcare-branded, or product that Angelcare ® monitor is free from any any problems that result from usage that is not...
Page 20
For assistance, FAQs or guidance with your monitor please visit our Customer Support page at Angelcare.co.uk www.angelcarebaby.com 01mf_Manuel_AC210_EN_UK_12680.indd 20 2017-08-09 11:48 AM...