Table of Contents
Advertisement
Installation
▇
Install the radio
1.
Attach the bracket, with 4.8 x 20 mm self-tapping screws, in a location where
convenient operation is accessible.
2.
Connect the supplied antenna and power cable to the radio.
3.
Slide the radio into the bracket, and secure it with the Adjust knobs.
4.
Attach the microphone hanger, with 4 x16 mm self-tapping screws, in a location where
the user is easy to reach.
5.
Plug the connector of the Palm microphone into the mic jack located on the front panel
of the radio, then place the microphone into the hanger.
1. Palm microphone
2. Adjust knobs
3. Main unit
4. Power inlet
5. Black lead
6. Red lead
7. Fuse
第 页 共 32 页
11
Advertisement
Table of Contents
