Radio Installation; Installing The Radio - HYT TM-800 UHF User Manual

Power Cable

Radio Installation

■ Installing the Radio

1. Attach the mounting bracket, using the 4.8 x 20mm self-tapping screws, in a location
where convenient operation is accessible.
2. Connect the antenna and the supplied power cable to the radio.
3. Slide the radio into the mounting bracket and secure it using the Adjustment screws.
4. Mount the microphone hanger, using the 4 x 16mm self-tapping screws, in a location
where it will be within easy reach of the user.
5. Connect the microphone plug to the microphone jack on the front panel of the radio,
then place the microphone on the hanger.
2
3
4
5
6
7
8
9
1. Microphone
2.
Mounting bracket
3. 4.8 × 20 mm Self-tapping screw
Fig. 1 Radio Set Connection Detail
10
Screw Set (Mounting Bracket)
1
12
11
10