Table of Contents
Advertisement
exits the scan mode.
2. Activate the Monitor function.
3. Receives carrier that satisfy radio unmute condition
▇ Scan Resume
If scanning pauses on an active channel, the scanning will resume according to the scan
resume mode. The scan resume mode is programmable by your dealer for Carrier
operated scan or Time operated scan.
1. Time Operated Scan
Scanning remains on an active channel for a programmed time period (programmable by
your dealer), once the timer expires, the radio will begin scanning other channels even if
the active channel is still busy.
2. Carrier operated scan
If carrier is detected during the scan sequence, scanning will remain on the active channel
until there is no activity.
▇ Dual Priority Scan
If dual priority channels are programmed by your dealer, the radio still checks the dual
priority channels for activity at configured intervals, while scanning pauses on a
non-priority channel. If carrier is detected on a priority channel, the radio will immediately
switch to the active priority channel.
LCD displays the "P
" icon if the current channel is programmed as the Priority Channel 1,
•
the "P." icon if the current channel is programmed as Priority Channel 2, while the "P:" icon
if the current channel is programmed as both the Priority Channel 1 and 2.
▇ Scan Add/Delete
If the Scan Add/Delete feature is enabled by your dealer, the current channel can be
added/deleted to/from the scan list, as the following procedures:
1. Select a channel to be added/deleted in the non-scan mode.
2. The current channel toggles between Add/Delete status upon each press the
第 页 共 32 页
20
Advertisement
Table of Contents
