Table of Contents
Advertisement
programmed Scan Add/Delete key.
Note: Only channels that added into the scan list can be scanned.
▇ Nuisance Channel Delete
Temporarily deletes a specific channel from your scan list during the scan sequence.
When scan pauses on an unwanted channel such as a noise channel, press the
programmed Add/Del Scan key to temporarily deleted the channel from the scan list, then
scanning reinitiates immediately.
Note: the temporary delete is not memorized once radio exits from the scan mode.
▇ Revert Channel
Upon pressing the [PTT] during scanning, the radio will pause scanning and switch to the
Revert Channel to transmit. This feature is programmable by your dealer.
▇ Off-Hook Scan
If the feature is enabled by your dealer, radio scans no matter the microphone is in the off
or on hook condition. Otherwise, microphone must be on hook for scanning.
Busy Channel Lockout (BCL)
The feature can be enabled/disabled by your dealer, this feature is to prevent transmission
on a channel that is already in use. Press the [PTT] on a channel that is already in use,
transmission is inhibited and an alert tone is heard. Upon release the [PTT], the alert tone
ceases and radio returns to receive mode. Press the [PTT] to transmit while the channel is
free.
BCL Override
If the BCL Override feature is enabled, you can override the BCL feature to transmit on a
busy channel. Press the [PTT], a BCL alarm will be heard, then repress the [PTT] within
0.5s to override the BCL feature and transmit on the busy channel.
第 页 共 32 页
21
Advertisement
Table of Contents
