HYT TM-800 Manual
  1. Manuals
  2. Brands
  3. HYT Manuals
  4. Radio
  5. TM-800
  6. Manual
HYT TM-800 Manual

HYT TM-800 Manual

Hide thumbs Also See for TM-800:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Manual
THANK YOU!
Thank you for your purchase of HYT mobile radio TM-800. We believe this
easy-to-use
radio
will
provide
you
with
dependable
and
reliable
communications at peak efficiency. Please read this manual carefully before
use. The information presented herein will help you to derive maximum
performance from your radio.
MODELS COVERED IN THIS MANUAL
TM-800 VHF Mobile Radio
TM-800 UHF Mobile Radio
Downloaded from
www.Manualslib.com
manuals search engine

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TM-800 and is the answer not in the manual?

Questions and answers

Related Manuals for HYT TM-800

Summary of Contents for HYT TM-800

  • Page 1 THANK YOU! Thank you for your purchase of HYT mobile radio TM-800. We believe this easy-to-use radio will provide with dependable reliable communications at peak efficiency. Please read this manual carefully before use. The information presented herein will help you to derive maximum performance from your radio.
  • Page 2 HOT SURFACE Avoid c onta ct durin g prolonged us e Do not touch the metal surface of the radio while it is in use. Do not mount the radio such that the chassis can come in contact with skin. High temperatures may burn you skin.
  • Page 3 Antenna substitution: Don’t substitute any antenna for the one supplied or recommended by the manufacturer or radio dealer. You may be exposing person(s) to excessive radio frequency radiation. You may contact your radio dealer or the manufacturer for further instructions. Warning Maintain a separation distance from the antenna to person(s) at least 82cm (32inches).

  • Page 4: Table Of Contents

    Contents Caution ANDATORY A FETY NSTRUCTIONS User Safety, Training, and General Information Compliance with RF Energy Exposure Standards FCC Compliance Precautions Product Inspection Radio Installation and Warnings Radio Overview Basic Operations Turn the Radio On/Off Adjust the Volume Monitor Select a Channel Select a Zone Receive Transmit...
  • Page 5 Dual Home Channels Horn Alert Selectable 2-Tone Encode Selectable 5-Tone Encode Display Frequency Display Label Display Mode LCD Backlight Compander Scrambler GPS Report HDC system User Set Mode Appendix 1 Entering Characters Optional Accessories Downloaded from www.Manualslib.com manuals search engine...

  • Page 6: User Safety, Training, And General Information

    BEFORE USING YOUR HYT MOBILE RADIO. Compliance with RF Energy Exposure Standards Your HYT mobile radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for occupational use only.

  • Page 7: Fcc Compliance

    FCC Licensing Requirements Your radio must be properly licensed Federal Communications Commission prior to use. Your HYT Wireless dealer can assist you in meeting these requirements. Your dealer will program each radio with your authorized frequencies, signalling codes, etc., and will be there to meet your communications needs as your system expands.
  • Page 8 * Do not place the radio in excessively dusty, humid areas, nor on unstable surfaces. * Refer service to qualified technicians only. Operation Safety Guidelines * For vehicles equipped with electronic anti-skid braking systems, electronic ignition systems or electronic fuel injection systems, interferences may occur during the radio transmission.

  • Page 9: Product Inspection

    Product Inspection Please carefully unpack the radio. Before use, it is recommended that you inspect the product as follows. First check the shipping carton for any signs of damage. Confirm the supplied product against the packing slip to assure accuracy. If any items are missing or have been damaged during shipment, please file a claim to the carrier immediately.

  • Page 10: Radio Installation

    Power Cable Screw Set (Mounting Bracket) Radio Installation ■ Installing the Radio 1. Attach the mounting bracket, using the 4.8 x 20mm self-tapping screws, in a location where convenient operation is accessible. 2. Connect the antenna and the supplied power cable to the radio. 3.

  • Page 11: Installation Tools

    4. Microphone hanger 5. 4 × 16 mm Self-tapping screw 6. Power input connector 7. Red lead 8. Black lead 9. Fuse 10. Antenna connector 11. Main unit 12. Adjustment screw ■ Installation Tools The following tools are required for proper installation of your radio: Electric drill: ¢6mm or above Cross head Screwdriver ■...

  • Page 12: Radio Overview

    Radio Overview ■ Front Panel View ① Power Switch Press to switch the radio on/off. ② Selector Knob Volume Up/Down, Channel Up/Down, Zone Up/Down features can be programmed to this knob (set by your dealer). Turn the knob clockwise to adjust upwards and counterclockwise to adjust downwards. ③...

  • Page 13: Lcd Display

    ■ LCD Display Indicator Description Display zone / channel number. Display zone / channel label (set by your dealer, up to 12 alphanumeric characters). Display channel Frequency Display the preprogrammed functions 1. Display zone / channel number. 2. Display transmit power level (H, M or L). 3.
  • Page 14 1. Indicate second development feature. 2. Appears when the auxiliary function is activated. SCAN Appears while scanning. CALL Appears when transmitting a selective call. Appears when a new message is received. Appears when the selected zone is in the scan list. Appears when the selected channel is in the scan list.
  • Page 15 17. Sel5Tone Sel HDC 19. TXPower Scan 21. Scan Add/Del 22. Reverse 23. TA 24. SELSQL 25. HomeCH 26. PA 27. HornAlert 28. LCDBL 29. Scramble 30. Compand 31. AUX A 32. AUX B 33. Send GPS 34. Emergency 35. Message ■...
  • Page 16 ① Antenna Connector Used to connect external antenna. ② Power input Connector Adopt HYT-authorized DC power cable and 13.6 V input AC power. ③ Speaker Jack Used to connect external speaker and only available for the plug of 3.5 mm.

  • Page 17: Basic Operations

    Basic Operations Turn the Radio On/Off Press the Power switch to switch the radio on. Press and hold the Power switch for approximately 1 second to switch the radio off. If Power on Password is set to protect your radio, “Chk P” and the cursor will appear on the display when power is turned on.

  • Page 18: Select A Channel

    Monitor Unmute-Toggle Press the [MONI] key to open CTCSS/CDCSS/DTMF/2-Tone/5-Tone signalling squelch. Press again to close the signalling squelch. Carrier Squelch-Momentary Hold down the [MONI] key to open carrier squelch; Release to close the carrier squelch. Carrier Squelch-Toggle Press the [MONI] key to open carrier squelch. Press again to close the carrier squelch.

  • Page 19: Transmit

    Transmit Press the key programmed as [MONI] to make sure that the selected channel is not in use. Pick up the remote speaker microphone and hold down the [PTT] key. Dial a DTMF number using the microphone keypad. Step 3 is not necessary all the time. Speak into the microphone with normal voice.

  • Page 20: Channel Scan

    Signal (for DTMF type only). Channel Scan ▇ Scan Types ● Single Zone Scan All channels in the current zone that have been added to the scan list can be scanned. ● Multi Zone Scan All channels within all the zones that have been added to the scan list can be scanned. ●...
  • Page 21 Scanning remains on an active channel until there are no activities; while the channel is free, the radio remains on the channel for the programmed Dropout Delay Time (programmed by your dealer) before it resumes scanning. ● Time Operated Scan Scanning remains on the active channel for only the programmed Dropout Delay Time (programmed by your dealer) before it resumes scanning.

  • Page 22: Busy Channel Lockout (Bcl)

    ▇ Look Back Temporary Disable When scanning looks back and stops on a priority channel, press the key programmed as [Add/Del] to deactivate the Look Back function. ▇ Nuisance Channel Temporary Delete This feature allows you to temporarily delete a channel to/from the scan list during scanning.

  • Page 23: Dtmf Call

    DTMF Call ▇ Manual Dial Hold down the [PTT] key, then enter the DTMF number by pressing the keys ([0] ~ [9], [ * ], [#]) on optional microphone keypad. Audible tone sounds when corresponding DTMF tone is transmitted. The radio can be programmed by your dealer to remain in transmit mode for 2 seconds after releasing the [PTT] key.
  • Page 24 To enter A,B,C,D,E,F, hold down the [PTT] key, then enter 2, 5, 8, 0, *, # respectively. 3. Press the [#] key, “------” appears on the LCD indicating the memory location. 4. Enter the desired memory location number (01～32). 5. Press the [#] key again to store the DTMF number into the memory location. If you enter a wrong digit or decide not to dial the number, press any key other than the power switch on the front panel to exit.

  • Page 25: Code Squelch

    Code Squelch The code squelch feature can be programmed by your dealer. If this feature is activated, squelch turns on only when the received DTMF/2-Tone/5-Tone code matches the radio ID code (set by your dealer). Otherwise, your radio will not respond to the calls.

  • Page 26: Time-Out-Timer (Tot)

    • Ringing tone • Alert Tone • Transpond code • Alert Tone + Transpond code Press any key to stop the ringing tone. Off-Hook Decode If your dealer has activated the feature, CTCSS/DCS decode signalling will be activated no matter whether the microphone is on-hook. Otherwise, decode signalling is deactivated during the off hook condition, squelch works as carrier squelch.

  • Page 27: Emergency Call

    Emergency Call Hold down the key programmed as [Emergency] for longer than a preset time ("Emergency Key Delay Time", programmable by your dealer) to enter emergency call mode. The radio will switch to the preset emergency zone / channel, then transmit and receive for a preset time in turn automatically.

  • Page 28: Programmable Auxiliary Functions

    Programmable Auxiliary Functions Your dealer can program the following auxiliary functions to the programmable keys PF1-PF6. Reverse Frequency If communications between radios are disrupted because of a long distance from the repeater, reverse frequency function can be used to re-establish communications to another radio.

  • Page 29: Selectable Squelch Level

    Press the key programmed as [TA] to toggle the Talkaround function ON and OFF. Selectable Squelch Level 1. Press the key programmed as [SEL SQL], the current squelch level is displayed on the LCD as shown below. 2. Turn the Selector Knob to select your desired squelch level. 3.
  • Page 30 normal user mode. 2. In PA mode, no transmission and reception occurs. 3. Hold down the [PTT] key and speak into the microphone, your voice can be heard from the external speaker that is connected to the radio. “PA On” appears on the LCD display.
  • Page 31 5. Press the key programmed as [MONI], signalling squelch turns back on. Note: The radio will opens signalling squelch automatically if no signal is received for the preset period of time. Selectable Five-Tone Encode 1. Press the key programmed as [FTS], the programmed 5-Tone code or name will be displayed on the LCD.
  • Page 32 Compander Press the key programmed as [Compander] to toggle Compander on/off. Scrambler Press the key programmed as [Scrambler] to toggle Scrambler on/off. Note: Emphasis/de-emphasis features are turned off when scrambler is activated and turned on when scrambler is deactivated. GPS Report When GPS receiver is installed, press the key programmed as [Send GPS] to transmit your position data.
  • Page 33 This function is applicable to such HDC Calls as PTT ID, Selective Call and Call Alert. For example, when a PTT ID, Selective Call or a Call Alert is received, the caller ID will be displayed on the receiving radio. Short Message Since Short Message function is realized through HDC2400 , the channels of the...
  • Page 34 Menu Operation: 1） Press PF6 to confirm; 2） Press PF1 to return to the previous; 3） Turn the knob or press Up/Down key to select. Message Receiving The radio emits an alert tone and the icon is shown on the display when a message is received (if corresponding functions are enabled).
  • Page 35 4） Select the desired message (Note 1) 5） Select “Transfer Msg” or “Delete Msg”. If “Delete Msg” is selected, the selected massage will be deleted. If “Transfer Msg” is selected, the following steps are required; 6） Select sending type, “Individual” or “Group Call”. 7）...
  • Page 36 6） Select “Protect Mode”, “Transfer Msg” or “Delete Msg”(Note 2); If “Delete Msg” is selected, the selected massage will be deleted. If “Transfer Msg” is selected, the following steps are required. 7） Select sending type, “Individual” or “Group Call”; 8） Use the knob selection/keypad entering to determine the desired receiver ID (individual/group).
  • Page 37 status. Press the PTT key or PF6 key to send it User Set Mode Turn the power on while holding down the [PF1] key, the radio enters User Set mode after correct power-on password is entered (if Power-On Password is set). In User Set mode, the following menus can be selected: Main Menu Menu Item...

  • Page 38: Downloaded From Www.manualslib.com Manuals Search Engine

    Zone Home Channel Home Zone Home Channel 1 Zone Selector Knob: change zone or channel Channel Home1 [PF5]: Toggle between zone and channel Home Channel 2 Zone Selector Knob: change zone or channel Channel Home2 [PF5]: Toggle between zone and channel ▇...
  • Page 39 UST 32 UST Code Name ASCII CODE UST 1 ---------- No input Signalling PF5: OFF/CTCSS/CDCSS CTCSS [PF4]: Toggle between (EIA standard mode) CTCSS 67.0 standard mode and step mode 67.0-254.1Hz [PF3]: Toggle between CDCSS CTCSS 254.1 and reverse CDCSS CTCSS (step: 0.1Hz) CTCSS 67.0*...
  • Page 40 CTCSS (step: 0.1Hz) CTCSS 67.0* 67.0-254.1Hz CTCSS 254.1* CDCSS (standard mode) CDCSS 023N 023-754 CDCSS 754N CDCSS (1 step mode) CDCSS 000N* 000-777 CDCSS 777N* CDCSS (standard mode) CDCSS 023 I 023-754 Reverse CDCSS 754 I CDCSS (1 step mode) CDCSS 000 I* 000-777 Reverse CDCSS 777 I*...
  • Page 41 [PF1] PF1 Off No function VOL UP PF1 VOL UP Volume Up VOL Down PF1 VOL Down Volume Down CH Up PF1 CH Up Channel Up CH Down PF1 CH Down Channel Down Zone Up PF1 Zone Up Zone Up Zone Down PF1 Zone Down Zone Down...
  • Page 42 Compander PF1 Compand Compander AUX A PF1 AUX A AUX A Port output control AUX B PF1 AUX B AUX B Port output control Send GPS PF1 Send GPS Send GPS Emergency Call PF1 Emergency Emergency call Message PF1 Message Message [PF2] PF2 Off...
  • Page 43 SEL SQL PF2 SELSQL Select squelch level Home CH PF2 HomeCH Home channel Public Address PF2 PA Public address Horn Alert PF2 HornAler Horn alert LCD Backlight PF2 LCDBL LCD backlight Scrambler PF2 Scramble Scrambler Compander PF2 Compand Compander AUX A PF2 AUX A AUXA Port output control AUX B...
  • Page 44 Scan PF3 Scan Scan Add/Del as not at scan status Add/Del PF3 Add/Del Temporarily delete nuisance channel Temporarily delete priority channel Reverse PF3 Reverse Reverse frequency Talk Around PF3 TA Talk around SEL SQL PF3 SELSQL Select squelch level Home CH PF3 HomeCH Home channel Public Address...
  • Page 45 User Selectable PF4 UserTone Tone 01-32 (CTCSS/CDCSS) Tone Sel 2Tone PF4 Sel2Tone Select 2-Tone encode Sel 5Tone PF4 Sel5Tone Select 5-Tone encode Sel HDC PF4 SelHDC Select HDC encode TX Power PF4 TXPower Switch transmit power Scan [default] PF4 Scan Scan Add/Del as not at scan status Add/Del...
  • Page 46 Moni D PF5 MoniD Monitor D: Carrier Squelch-Toggle DisplayLabel PF5 Dlabel Display channel label Display Frequency PF5 DFreq Display frequency Display Mode PF5 DMode Display toggles among channel number, channel label and channel frequency User Selectable PF5 UserTone Tone 01-32 (CTCSS/CDCSS) Tone Sel 2Tone PF5 Sel2Tone...
  • Page 47 CH Down PF6 CH Down Channel Down Zone Up [default] PF6 Zone Up Zone Up Zone Down PF6 Zone Down Zone Down Moni A PF6 MoniA Monitor A: Monitor Unmute-momentary Moni B PF6 MoniB Monitor B: Monitor Unmute-Toggle Moni C PF6 MoniC Monitor C: Carrier Squelch-momentary Moni D...
  • Page 48 Emergency Call PF6 Emergency Emergency call Message PF6 Message Message [Selector Knob] Volume Knob Volume Knob Volume Knob [Default] Channel Knob Channel Knob Channel selector knob Zone Knob Zone Knob Zone selector knob [UP/Down] Volume Up/Down Volume UpDn Volume Knob Channel Up/Down Channel UpDn...

  • Page 49: Optional Accessories

    “7” key four (4) times. & < > “ ‘ Press to toggle between number and character Press to clear the input Enter (Complete programming and store) ▇ Entering characters without a keypad ① Turn Selector Knob to choose the character to be entered. ②...
  • Page 50 HYT endeavors to achieve the accuracy and completeness of this manual, but cannot guarantee its accuracy at all time. All the above specifications and design are subject to change by HYT without notice. All the reproduction and translation of this manual without authorization of HYT is not allowed. Downloaded from www.Manualslib.com...

Table of Contents