Table of Contents
Advertisement
Basic Operations
Turn Radio On/Off
Press the power switch to turn on the radio.
Press and hold down the power switch for about 1 second to turn off the radio.
Adjust the Volume
Turn the Volume Control Knob clockwise to increase the volume, or counter-clockwise to
decrease the volume. During adjusting, please note that if the radio is programmed with
CTCSS/CDCSS or 2-Tone signalling squelch, noise will not be heard from local speaker
even though you turn the volume control knob fully clockwise.
Monitor
If the Monitor function is set by your dealer, press the programmed Monitor key while in
receive mode, to hear activities on the current channel.
The Monitor key is programmable with one of the following four operating modes by your
dealer:
1. Carrier Squelch-Momentary
Hold down the [MONI] key to open CTCSS/CDCSS/2-Tone signalling squelch. Release to
close the signalling squelch.
2. Carrier Squelch-Toggle
Press the [MONI] key to open CTCSS/CDCSS/2-Tone signalling squelch. Press again to
close the signalling squelch.
3. Squelch Off-Momentary
Hold down the [MONI] key to open carrier squelch; Release to close the carrier squelch.
4. Squelch Off-Toggle
Press the [MONI] key to open carrier squelch. Press again to close the carrier squelch.
Select a Channel
The [▲]/[▼], [P1]-[P4] function keys are programmable by your dealer to select a channel.
第 页 共 32 页
17
Advertisement
Table of Contents
