Table of Contents
Advertisement
1. Press the [#] key on the microphone keypad, then the LCD displays "D ------".
2. Enter the desired number (range from 0~9, A~F) via the microphone keypad. If you
want to enter A, B, C, D, E, F, please enter 2, 5, 8, 0, *, # respectively while holding down
the [PTT].
3. Press the [#] key, the " --" is displayed following the "D" character, indicating the
location of the memory number.
4. Enter the desired memory number (01~32).
5. Press again the [#] key on the microphone keypad, then the entered number is stored
into the corresponding memory.
If you dialed a wrong number or you want to cancel the dialing, please press any key on
the front panel other than the power switch to exit.
▇ Confirm the Stored DTMF Numbers
1. Press the [*] key on the microphone keypad, then the LCD displays "A --".
2. Enter the memory number (01~32), the LCD displays the stored number or its alias.
3. Press any key other than the [PTT], the LCD resumes the initial display.
▇ Auto Dial
1. Press the [*] key on the microphone keypad, then the LCD displays "A --".
2. Enter the memory number (01~32), the LCD displays the stored number or its alias.
3. Press the [PTT], then the number is transmitted.
▇ Clear Stored DTMF Numbers
1. Press the [#] key on the microphone keypad, then the LCD displays "D ------".
2. Press again the [#] key on the microphone keypad, then the LCD displays "Clear --".
3. Enter the memory number that to be cleared (01~32). To cancel this operation, please
press any key other than 0~9.
4. Press the [#] key on the microphone keypad, then the stored number is cleared.
▇ Redial
1. Press the [*] key on the microphone keypad, the LCD displays "A --".
第 页 共 32 页
23
Advertisement
Table of Contents
