Radio Installation
■ Installing the Radio
1. Attach the mounting bracket, using the 4.8 x 20mm self-tapping screws, in a location
2. Connect the antenna and the supplied power cable to the radio.
3. Slide the radio into the mounting bracket and secure it using the Adjustment screws.
4. Mount the microphone hanger, using the 4 x 16mm self-tapping screws, in a location
5. Connect the microphone plug to the microphone jack on the front panel of the radio,
2
3
4
5
6
7
8
9
Downloaded from
www.Manualslib.com
Power Cable
where convenient operation is accessible.
where it will be within easy reach of the user.
then place the microphone on the hanger.
Fig. 1 Radio Set Connection Detail
1. Microphone
2.
Mounting bracket
3. 4.8 × 20 mm Self-tapping screw
manuals search engine
Screw Set
(Mounting Bracket)
1
12
11
10
10