Selecting The Call Tone; Busy Channel Lockout - Uniden X76 Owner's Manual

Operation

Selecting the Call tone

1. Press [MENU]. Scroll to Call Tone
and press [MENU].
The call tone setting flashes.
2. Press /
setting between 1, 2, 3, 4 and 5.
3. Press the PTT button to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

Busy Channel Lockout

If the channel is already in use, you can prevent the UHF CB Radio
from transmitting. This is particularly important when using CTCSS/DCS.
1. Press [MENU]. Scroll to BCL
and press [MENU].
The BCL setting flashes.
2. Press /
setting between ON or OFF.
3. Press the PTT button to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE
UNIDEN X76
to change the
to change the
21
UHF CB Transceiver