Care And Maintenance; Cleaning The Front Of The Appliance And The Door Seal; Cleaning The Filters - Hanseatic WQP8-7636Q User Manual

Care and maintenance

Cleaning the front of the
appliance and the door seal
WARNING!
Risk of electric shock!
Improper use of this appliance may
lead to electric shocks.
Switch off the appliance before clean-
■
ing, and pull the mains plug out of
the socket or disconnect the fuse.
Never spray the device with a water
■
jet (high-pressure cleaner).
NOTICE
Risk of damage!
The seals of the door are sensitive to oil
and grease. The door seals can be dam-
aged by unsuitable cleaning agents.
Do not use harsh, aggressive, sol-
■
vent-based or abrasive cleaners.
Do not grease the door seals.
■
If water gets into the lock, the lock and
the electric components in the door
may become damaged.
Use a damp cloth to clean the inner
■
edges of the door.
Do not use any cleaning sprays.
■
1. Wipe the front of the appliance with a
damp cloth and some all-purpose clean-
ing product and wipe it off with a dry tow-
el.
2. Clean the door seal and the inside of the
door regularly with a damp cloth.
Care and maintenance

Cleaning the filters

NOTICE
Risk of damage!
Using the appliance without the fi l-
ters or with improperly fi tted fi lters can
cause the dishwashing performance to
be impeded or may damage the device.
Prior to launching a dishwashing pro-
■
gramme, always ensure that the fi l-
ters have been correctly installed in
the appliance.
Clean the fi lters at least once a week.
■
Clean the fi lters with care; do not
■
bend them.
If you replace the fi lters, always use
■
genuine replacement parts.
(38)
(39)
(40)
Regularly remove any food scraps from the
coarse filter (38), the main filter (39) and the
fine filter (40).
1. Empty the lower dish rack and remove it.
2. Turn the coarse filter (38) in an anti-clock-
wise direction and remove the filters in an
upward direction.
3. Clean the filters carefully under running
water.
4. Replace the filters and turn the coarse fil-
ter in a clockwise direction up to the stop
point.
Page EN-21