Care And Maintenance; Cleaning The Front Of The Appliance And The Door Seal; Checking And Cleaning The Filters - Hanseatic HGTI6082D137709HS User Manual

Page EN-26

Care and maintenance

Cleaning the front of the
appliance and the door seal
WARNING
Risk of electric shock!
Improper use of this appliance may
lead to electric shocks.
■ Prior to cleaning, switch off the ap-
pliance, pull out the mains plug and
switch off the
■ Never spray the appliance with a wa-
ter jet (high-pressure cleaner).
NOTICE
Risk of damage to property!
The door seals are sensitive to oil and
grease. The surfaces can be damaged
by unsuitable cleaning agents.
■ Do not use harsh, aggressive, sol-
vent-based or abrasive cleaners.
■ Do not grease the door seals.
If water gets into the lock, the lock and
the electric components in the door
may become damaged.
■ Use a damp cloth to clean the inner
edges of the door.
■ Do not use any cleaning sprays.
1. Wipe the front of the appliance with a
damp cloth and some all-purpose clean-
ing product and wipe it off with a dry
towel.
Take note of the manufacturer's care in-
structions when cleaning the front panel
of the dishwasher.
2. Clean the door seal and the inside of the
door regularly with a damp cloth.
Checking and cleaning the
filters
NOTICE
Risk of damage to property!
Using the appliance without the fi l-
ters or with improperly fi tted fi lters can
cause the dishwashing performance to
be impeded or may damage the device.
fuse. ■ Prior to launching a dishwashing pro-
gramme, always ensure that the fi l-
ters have been correctly installed in
the appliance.
■ Clean the fi lters at least once a week.
■ Clean the fi lters with care; do not
bend them.
■ If you replace the fi lters, always use
genuine replacement parts.
Coarse filter
Main filter
Fine filter
Check the coarse filter , the main filter and the
fine filter after each rinse cycle and remove
food residues and foreign bodies if neces-
sary:
1. Empty the lower dish rack and remove it.
2. Turn the coarse filter in an anticlockwise
direction and remove the filters in an up-
ward direction.
3. Clean the filters carefully under running
water.
4. Replace the filters and turn the coarse
filter in a clockwise direction up to the
stop point.
Care and maintenance