Adding Dishwasher Salt, Rinse Aid And Dishwasher Detergent; Adding Dishwasher Salt - Hanseatic WQP8-7636Q User Manual

Page EN-10

Adding dishwasher salt, rinse aid and dishwasher detergent

Adding dishwasher salt, rinse aid and dishwasher detergent
WARNING!
Risk of poisoning!
Dishwasher detergents, rinse aid and
dishwasher salt can be damaging to
the health.
Keep these products out of the reach
■
of children and pets.
Never use the water inside the appli-
■
ance as drinking water.
.

Adding dishwasher salt

NOTICE
Risk of damage!
You may damage the dishwasher, its
surfaces, its seals and fi lters by using
dishwasher salt in an improper manner.
Only use regenerating salt which is
■
suitable for dishwashers.
Always wipe away split dishwasher
■
salt immediately with a damp cloth.
Immediately after adding the dish-
■
washer salt, launch a dishwashing
programme.
The dishwasher salt softens the water result-
ing in fewer calcification deposits on dishes.
• Add dishwasher salt before first use and
when the indicator
You do not need to use dishwasher salt
– if you are only using multitabs which al-
ready contain dishwasher salt,
– if the water hardness in your area is in the
0–5° dH range.
(22) lights up.
1. Remove the lower dish rack (25).
(29)
2. Turn the cover of the dishwasher salt dis-
penser (29) in an anti-clockwise direction
and remove it.
(b)
3. Place the included filling funnel (b) on the
dispenser opening.
4. Add 1.5 kg of dishwasher salt.
5. Fill the dispenser with water to the rim.
This prevents the dishwasher salt from
clumping. Water may come out; this is not
a problem.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt dis-
penser in a clockwise direction up to the
stop point.
8. Replace the lower dish rack.
9. Launch a dishwashing programme
straight away or carry out a test run im-
mediately upon first use using (see „Wa-
ter hardness" on page EN-26).