Care And Maintenance; Cleaning The Front Of The Appliance And The Door Seal; Checking And Cleaning The Filters - Hanseatic HGTI6082C147735TS User Manual

Care and maintenance

Cleaning the front of the
appliance and the door seal
WARNING
Risk of electric shock!
Improper use of this appliance may
lead to electric shocks.
■ Switch off the appliance before clean-
ing, and pull the mains plug out of
the socket or disconnect the fuse.
■ Never spray the appliance with a wa-
ter jet (high-pressure cleaner).
NOTICE
Risk of damage!
The door seals are sensitive to oil and
grease. The surfaces can be damaged
by unsuitable cleaning agents.
■ Do not use harsh, aggressive, sol-
vent-based or abrasive cleaners.
■ Do not grease the door seals.
If water gets into the lock, the lock and
the electric components in the door
may become damaged.
■ Use a damp cloth to clean the inner
edges of the door.
■ Do not use any cleaning sprays.
1. Wipe the front of the appliance with a
damp cloth and some all-purpose cleaning
product and wipe it off with a dry towel.
Take note of the manufacturer's care in-
structions when cleaning the front panel of
the dishwasher.
2. Clean the door seal and the inside of the
door regularly with a damp cloth.
Care and maintenance
Checking and cleaning the
filters
NOTICE
Risk of damage!
Using the appliance without the fil-
ters or with improperly fitted filters can
cause the dishwashing performance to
be impeded or may damage the appli-
ance.
■ Prior to launching a dishwashing pro-
gramme, always ensure that the fil-
ters have been correctly installed in
the appliance.
■ Clean the filters at least once a week.
■ Clean the filters with care; do not
bend them.
■ If you replace the filters, always use
genuine replacement parts.
(44)
(45)
(46)
Check the coarse filter (44), the main fil-
ter (45) and the fine filter (46) after each rinse
cycle and remove food residues and foreign
bodies if necessary.
1. Empty the lower dish rack (31) and re-
move it.
2. Turn the coarse filter (44) in an anti-clock-
wise direction and remove the filters in an
upward direction.
3. Clean the filters carefully under running
water.
4. Replace the filters and turn the coarse fil-
ter in a clockwise direction up to the stop
point.
Page EN-27