Add Dishwasher Detergent; Use Multitabs - Hanseatic WQP8-7636Q User Manual

Page EN-12 Adding dishwasher salt, rinse aid and dishwasher detergent

Add dishwasher detergent

Only use dishwasher detergent which is in-
tended specifically for dishwashers.
(32)
(37)
1. Push the opener (37) to the side.
The cover of the dishwasher detergent dis-
penser (32) springs open.
2. For
– lightly soiled dishes pour the entire
quantity of dishwasher detergent into the
detergent dispenser.
– heavily soiled dishes pour approx. 4/5
of the dishwasher detergent into the
detergent dispenser. Add the remaining
dishwasher detergent to the indenta-
tion in front of the cover. Your appliance
uses this quantity during the pre-wash
programme.
3. Push the dispenser cover closed so that
the catch clicks into place once again.

Use multitabs

Many multitabs already contain dishwash-
er detergent, dishwasher salt and rinse aid,
meaning that you do not need to use these
three products separately. In this case, you
can ignore the indicators
(23) and "Add dishwasher salt" (22).
If your water is in the
– "soft" to "medium" hardness range, multi-
tabs will deliver good results.
– "hard" range, we would recommend that
you do not use multitabs and instead use
dishwasher detergent, dishwasher salt and
rinse aid individually.
To determine and adjust the water
hardness see page EN-26.
(32)
(37)
1. Push the opener (37) to the side.
The cover of the dishwasher detergent dis-
penser (32) springs open.
2. Place 1 multitab in the dishwasher deter-
gent dispenser.
3. Push the dispenser cover closed so that
the catch clicks into place once again.
"Add rinse aid"