Temperature and Humidity
Maintain the specified temperature and humidity even when the machine is not in use. Failure to do so may result
in malfunction.
• During operation: Temperature: 15 to 32°C (59 to 90°F), humidity: 20 to 80%RH (no
condensation)
• During non-operation: Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no
condensation)
Installation Space
The space shown in the figure is required in order to use this machine.
Air Ventilation
This machine emits a small amount of volatile compounds during printing and for some time after printing, which
may cause irritation of your eyes, nose, and throat. When using this machine, make sure to ventilate the area. Install
ventilating equipment as necessary.
P. 49 "5. Installation of Ventilating Equipment"
4,000 mm (157.5 in.) (64-inch model)
3,100 mm (122 in.) (30-inch model)
3,000 mm (118.1 in.) (64-inch model)
2,100 mm (82.7 in.) (30-inch model)
Unit space
1. Checks before Installation
Work space
2.Installation
23