Table of Contents
Advertisement
3.
Insert the ink cartridge for each color.
A
Before inserting ink cartridges, shake each of them 50 times (about 20 seconds).
The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes well,
shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink
cartridge.
B
When the following screen is displayed, insert an ink cartridge for each color.
SET CARTRIDGE
12345678
Insert the ink cartridge for each color.
When ink cartridges are inserted in all the slots, the following screen appears.
FILLING INK...
>
C
When the screen shown below appears, remove the drain bottle and discard the discharged
fluid.
EMPTY
DRAIN BOTTLE
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution
to prevent this fluid from soiling your hands.
D
Quickly attach the emptied drain bottle to the machine once more.
E
Make sure the drain bottle is installed, and then press [ENTER].
When the following screen is displayed, filling with ink is finished.
SETUP SHEET
F
Close the front cover.
2. Assembly and Ink Filling
2.Installation
39
Advertisement
Table of Contents
