Roland VersaUV LEC2-330 Setup Manual page 29

D
Place the machine on the stand.
Align the holes on the bottom of the machine with the protrusions on the arms. After setting washers on
the bolts, tighten the bolts securely (eight locations in total). Loose bolts may cause the stand to wobble.
IMPORTANT
When lifting the machine, hold the specified locations.
Tighten
fully
Bolts: 8
Washers: 8
Hexagonal
wrench
: Location to hold by hand (side of the machine)
Bolt
Washer
Bolt
Washer
2. Assembly and Ink Filling
Align the machine with
the arms.
Bolt
Washer
Bolt
Washer
Hexagonal
wrench
: Location to hold by hand (rear of the machine)
2.Installation
27