5.Cutting Function
Cut carriage
⚫
Specifications
Blade: ZEC-U5032
❖
Cutter Holder: XD-CH3
❖
Maximum cutting down force: 500 gf
❖
Maximum cutting Speed: 300 mm/sec
❖
Crop mark sensor
In order to improve the accuracy in reading crop mark, the following has been changed.
❖
-Crop mark sensor has been changed.
-Voltage is adjusted at a white part of vinyl.
-As the rotation range of the volume for voltage adjustment became larger, voltage value at the time of
adjustment has been stabilized.
Gloss vinyl is necessary for voltage adjustment. The following medias are recommended.
❖
- IJ5331, IJ1220, LLSPEX, 3164G, MP1105, 5829R
Volume for voltage adjustment
For the volume for voltage
adjustment, flathead precision
screwdriver is needed.
Crop mark
sensor
-Black square is printed, and
voltage is adjusted by the black
part of vinyl.
Crop mark sensor
LEC-330
Crop mark
sensor
-Voltage of the sensor is
adjusted at a white part of vinyl.
Operation time is shorter, since
printing is not performed.
CONFIDENTIAL
LEC2-300
22/42