2. STEERING MODES
2.5
TURN Mode
The TURN mode has two types: normal turn and FishHunter
™
Hunter
mode turn, see section 2.6.
Note 1: Turn mode is not available with a sailboat.
Note 2: FishHunter
2.5.1
How to select a normal turn and start the turn
The normal turn provides three preset turning motions: 180°, 360°, and user turn.
These turns are available in the AUTO and NAV mode and in clockwise and counter
clockwise directions.
Select the 180°, 360°, or user turn as follows:
1. Press the
2. Rotate the Course control knob to select a turn.
The cursor highlights current selection. See section 2.5.2 and section 2.6.1 for de-
scription of turns.
180° Turn
Orbit Turn
Note 1: You can set the parameters for the user turn (before starting the turn) by
pressing the
Note 2: Only 180°, 360°, and user turn are available with Fantum Feedback
2-10
™
mode turn is not available with Fantum Feedback
key to show the turn menu.
Turn 180° to STBD
Push to ENTER
Rotate to choose
360° Turn
Spiral Turn
Figure 8 Turn
key. For details, see "User turn" on page 2-12.
User Turn
(Defaut setting: 45°)
Square Turn
™
mode turn. For Fish-
™
.
Circle Turn
Zigzag Turn
™
.