Alarm Log - Furuno NAVpilot 711C Operator's Manual

3. ALARMS
3.13

Alarm Log

The Alarm Log shows the date, time and alarm no. of violated alarms. A maximum of
20 alarms are listed on the Alarm Log. When the capacity is exceeded, the oldest
alarm is deleted to make a room for the latest.
To show this log, do as follows.
1. Long press the
2. Rotate the Course control knob to select [Other Menu] then push the knob.
3. Rotate the Course control knob to select [System Setup] then push the knob.
4. Rotate the Course control knob to select [Alarm Log] then push the knob.
The Alarm Log appears on the display.
3-10
key to open the menu.
Alarm Log
2009/10/26 09:54:30 5105
Alarm no. (see section 5.5.4.)
Time of alarm
Date of alarm