How To Set The Steering Behavior Of Your Boat After You Arrive To A Waypoint - Furuno NAVpilot 711C Operator's Manual

2. STEERING MODES
2.3.4 How to set the steering behavior of your boat after you arrive
to a waypoint
When you arrive to the last waypoint in a route, the FishHunter
ed automatically to steer the boat according to the FishHunter
tails of each preset, see section 2.6.
This function is not available with a sailboat.
To enable the FishHunter
1. In the NAV mode, long press the
2. Rotate the Course control knob to select the current set-
ting for [After Arrival] then push the knob.
[After Arrival] also appears on the [NAV Option] menu.
For Fantum Feedback
STBD] appear.
• [GO Straight]: Cruise straight after arriving at the last
waypoint.
• [Orbit to PORT]: Orbits to PORT around waypoint.
• [Orbit to STBD]: Orbits to STBD around waypoint.
• [Figure Eight PORT]: Turns to PORT in a figure-eight pattern.
• [Figure Eight STBD]: Turns to STBD in a figure-eight pattern.
• [Square PORT]: Turns to PORT in a square pattern.
• [Square STBD]: Turns to STBD in a square pattern.
3. Rotate the Course control knob to select an option then push the knob.
4. Press the
2-8
™
mode and set the steering behavior, do as follows:
™
, only [GO Straight] and [Orbit to
key to close the menu.
™
™
key to show the menu.
mode can be activat-
mode preset. For de-
GO Straight
Orbit to PORT
Orbit to STBD
Figure Eight PORT
Figure Eight STBD
Square PORT
Square STBD