Course After Operation Of A Remote Controller - Furuno NAVpilot 711C Operator's Manual

4.4

Course After Operation of a Remote Controller

Select the course to follow after a remote controller is operated.
Note: This feature is not available with Fantum Feedback
Previous course
Remote
controller: OFF
Remote
controller: ON
[Cse After Remote] = [Previous Course]
1. In the AUTO mode, long press the
2. Rotate the Course control knob to select the current setting for [Cse After Re-
mote] then push the knob.
[Cse After Remote] also appears on the [AUTO Option] menu.
3. Rotate the Course control knob to select desired option then push the knob.
[Previous Course]: Keep the course before the operation of a remote controller.
[Present Course]: Keep the course after the operation of a remote controller.
4. Press the
New course
Remote
controller: OFF
[Cse After Remote] = [Present Course]
Previous Course
Present Course
key to close the menu.
™
.
Remote
controller: ON
key to open the menu.
4. USER MENU
Previous course
4-7