Table of Contents
Advertisement
2. STEERING MODES
2.6.3
How to set FishHunter
You can set the parameters for the FishHunter
1. Long press the
2. Rotate the Course control knob to select [Other Menu] then push the knob.
3. Rotate the Course control knob to select [Fish Hunter Option] then push the
knob.
4. Rotate the Course control knob to select the turn desired then push the knob.
Set the parameters for each turn referring to the figure bellow.
Fish Hunter Option
Circle
Orbit
Spiral
Figure 8
Square Turn
Zigzag
2-20
™
turn parameters
key to open the menu.
Fish Hunter Option
Circle
Orbit
Spiral
Figure8
Square Turn
Circle
Rate of Turn:
3
Orbit
Radius:
0.05
NM
SPIRAL
Speed:
0.5
kn
Radius:
0.05 NM
Figure 8
Radius:
0.05
NM
Square Turn
Side Length:
1.0
NM
Azimuth: Auto
Auto
Manual
Zigzag
Turn Angle:
90
°
Termination: Continuous
Distance:
Number of Turns:
Width: 0.5 NM
Number of Turns
Distance
Continuous
™
turns as follows:
<Setting range>
1°-5°/s
°/s
0.05-9.99 NM
[Speed]: 0.1-2.0 kn
[Radius]: 0.05-9.99 NM
0.05-9.99 NM
[Side Length]: 1.0-9.9 NM
[Azimuth]: 0-359° ([Manual])
[Turn Angle]: 30°-150°
[Number of Turns]: 1-20
([Termination] = [Number of Turns])
[Distance]: 1-99 NM
([Termination] = [Distance])
[Width]: 0.1-9.9 NM
Advertisement
Table of Contents
