Table of Contents
Advertisement
Vizi CMY300
NOTICE: The suitable enviromental temperature for this lighting fixture is between -25˚ C to 45˚ C.
Do not place this lighting fixture in an enviroment where the temperatures are under or above the
temperatures stated above. This will allow the fixture to run at its best and help prolong the fixture
life.
1. Bolt each clamp to the Omegaholder with screw and lock nut throughthe hole in the holder.
2. Fastenthe omega holders on the bottom of the base by inserting quick lock fasteners into the holes
of the base and tightenfully clockwise.
3. Hangthe xture to the support using the clamps and tighten the screws. Fasten a safety cable through
the bottom of the base and over the support.
Screw one clamp each via a M12 screw and nut into the Omega holders. Insert the quick-lock fas-
teners of the Omega holder's into the respective holes on the bottom of the Vizi CMY300. Tighten
the quick-lock fasteners fully clockwise. Install the second Omega holder. Pull the safety-cable
through the openings located on the base plate and over the trussing system or a safe fixation spot.
Insert the end in the carabine and tighten the safety screw.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 8
1.Clamp
2.Omega-holders
3.Quick-lock fastener
Mounting
Advertisement
Table of Contents
