Table of Contents
Advertisement
Vizi CMY300
SPECIAL FUNCTIONS -
Factory Setting - Within this menu, you can reset the fixture to factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that "Special Functions" is higlighted, then
press ENTER.
2. "Factory Setting" will now be displayed, and press ENTER.
3. To reset the fixture to factory settings, use the UP or DOWN buttons to "Yes" and press ENTER. If you do
not wish to reset to factory settings, highlight "No" and press ENTER.
Vizi CMY300
With this feature you are able to control the unit with DMX without the need of XLR cables. Your
DMX controller must be connected to a ADJ WiFly TransCeiver or have WiFly wireless DMX remote
to use this function. You are able to communicate up to 2500 feet/760 meters (open line of sight).
1. Follow the instructions on page 30 to activate WiFly and set the Wireless address. The address
must match the address set on the WiFly Transceiver.
2. After you have set the WiFly address, follow the DMX instructions on page 29 to select your
desired DMX Channel mode and set your DMX address.
3. Apply power to the ADJ WiFly Transceiver. The fixture must be set up first before you apply
power to WiFly Transceiver.
Note: If the sync does not work, switch the WiFly power off then on again.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 35
Operating Instructions
WDMX (WiFly) Set Up
Advertisement
Table of Contents
