Table of Contents
Advertisement
Vizi CMY300
Temperature - With this function, you can check the fixture temperature.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is higlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Temperature" is displayed, and press ENTER. The current fixture
temperature will now be displayed.
3. Press the MENU button to return to the main menu.
USB Upgrade File - This submenu is used for any future software updates. Check www.adj.com
and this units webpage for any software updates. Download the software update to a flash stick and
plug the flash stick into the Flash Drive slot located on the front of the unit.
1. Contact ADJ customer service for help when updating software.
Firmware Version - With this function, you can check the current firmware version.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is higlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Firmware Version" is displayed, and press ENTER. The current
firmware version will now be displayed.
3. Press the MENU button to return to the main menu.
RESET FUNCTIONS -
Pan & Tilt - With this function, you can reset the pan & tilt motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Pan & Tilt" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the pan & tilt motors, select "Yes"
and press ENTER.
Effect - With this function, you can reset the effect motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Effects" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the effects motors, select "Yes"
and press ENTER.
All - With this function, you can reset all of the motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "All" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset all of the motors, select "Yes" and
press ENTER.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 34
Operating Instructions
Advertisement
Table of Contents
