Table of Contents
Advertisement
Vizi CMY300
Magenta
- Setting adjustment for magenta color disc.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Magenta" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Yellow
- Setting adjustment for Yellow color disc.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Yellow" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Color
- Setting adjustment for color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Color" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Gobo1
- Setting adjustment for gobo wheel 1 (glass gobo wheel).
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Gobo1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
R Gobo1
- Setting adjustment for the gobo rotation in gobo wheel 1 (glass gobo wheel).
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "R Gobo1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Gobo2
- Setting adjustment for gobo wheel 2.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Gobo2" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Prism1
- Setting adjustment for the 1st prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Prism1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 37
Offset Menu
Advertisement
Table of Contents
