Table of Contents
Advertisement
Vizi CMY300
P/T Feedback - With this function, you have the pan and tilts postion feedback while out of step or not feed-
back while out of step.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "P/T Feedback" is displayed, and press ENTER. The current setting
will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate feedback,
"NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Dimmer Mode - With this function, you can select your desired dimmer curve. See the chart on page 42 for
the different curves.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Dimmer Mode" is displayed, and press ENTER. The current curve
setting will now be displayed.
3. Use the UP or DOWN buttons to scroll through the different dimmer curves.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Focus Compensate - With this function, you can select the focus in regards to projected distance. This
setting is used in conjuction with the focus channel in your selected DMX mode. Example: If the unit is being
used in a short distance around 5 meters then "NEAR" should be selected.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Focus Compensate" is displayed, and press ENTER. The current
setting will be displayed.
3. Use the UP or DOWN buttons to scroll through the different settings.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Fan Speed - With this function, you can select your desired fan speed.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Fan Speed" is displayed, and press ENTER. The current setting will
be displayed.
3. Use the UP or DOWN buttons to toggle between the three settings.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 32
Operating Instructions
Advertisement
Table of Contents
