ADJ VF Snow Flurry HO User Manual
Hide thumbs Also See for VF Snow Flurry HO:

Advertisement

Quick Links

VF SNOW
FLURRY HO
User Manual
Rev. 04/12/2022

Advertisement

Table of Contents
loading

Summary of Contents for ADJ VF Snow Flurry HO

  • Page 1 VF SNOW FLURRY HO User Manual Rev. 04/12/2022...
  • Page 2 Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
  • Page 3 These instructions contain important information regarding safety during usage and maintenance. Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide set up help and to answer any questions that may arise during set up or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions.
  • Page 4: Warranty

    WARRANTY MANUFACTURER’S LIMITED WARRANTY A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
  • Page 5: Warranty Registration

    WARRANTY REGISTRATION The VF Snow Flurry HO snow machine carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items, whether under war- ranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. The R.A.
  • Page 6: Safety Precautions

    SAFETY PRECAUTIONS • In the event that the unit needs to be returned to ADJ Products, LLC for service, use only the origi- nal packaging and materials for shipping. • To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
  • Page 7: Dmx Set Up

    Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your device. The VF Snow Flurry HO is available in 120v and 220v versions. Because line voltage may vary from venue to venue, it is important to verify that your unit voltage matches the wall outlet voltage before attempting to operate your fixture.
  • Page 8 2 and 3 of a male connector (DATA+ and DATA-). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable ter- minator (ADJ part number Z-DMX/T) will decrease the possiblities of erratic behavior. Termination reduces signal errors and avoids signal transmission problems and interference.
  • Page 9 3. Remove the fluid reservoir and fill it with ADJ® brand snow juice only, then replace the reservoir. 4. Place the feeder tube with the filter deep inside the reservoir and tighten the cap.
  • Page 10: Dmx Operation

    DMX OPERATION This device features 1-channel DMX control, which allows you to control the fixture with a standard DMX 512 controller. 1. You can plug the DMX cable and controller directly into the snow machine, and the snow ma- chine will automatically detect the DMX signal. The currently selected DMX address will appear on the display screen.
  • Page 11 “-” decreases snow output. TIMER REMOTE CONTROL Always be sure to maintain an adequate supply of ADJ Brand Snow Juice in the fluid reservoir. Running the snow machine dry will cause pump failure and or clogging. This is the leading cause of failure in snow, fog, and haze machines.
  • Page 12: Troubleshooting

    TROUBLE SHOOTING If you experience low snow output, pump noise, or no snow output at all, disconnect the device from power and discontinue use immediately. Do not continue to push the remote control’s activation button, as this may damage the device. Check fluid level, the external fuse or breaker, and remote connection, and verify that the wall outlet is sending power.
  • Page 13: Specifications

    SPECIFICATIONS MODEL: VF Snow Flurry HO Voltage: 110V~50/60Hz or 220V~50/60 Hz (pre-set at factory, cannot be altered) Weight: 17.5 lbs. / 8 kgs. Dimensions: With Bracket: 20” (L) x 12.5” (W) x 13.75” (H) 510mm (L) x 316mm (W) x 349mm (H) Without Bracket: 20”...

Table of Contents