Table of Contents
Advertisement
Vizi CMY300
DISPLAY SETTINGS -
Display Invert - With this function, you can "flip" the display 180 degrees.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Display Invert" is displayed, and press ENTER. The current setting
will now be displayed.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". Selecting "Yes" will "flip" the display, "No"
will return the display to normal.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Backlight Intensity - With this function, you can adjust the intensity of the display backlight.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Backlight Intensity" is displayed, and press ENTER. The current setting
will now be displayed.
3. Use the UP or DOWN buttons to to adjust the intensity between 0-30. 0 is the lowest intensity, 30 the
brightest intensity.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Temperature Unit - With this function, you can switch the temperature setting between Celsius or Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Temperature Unit" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between °C or °F.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE TEST -
Fixture Test - With this function, you can run an Auto Test or a Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Test" is higlighted, then press
ENTER.
2. Use the UP or DOWN buttons to switch between "Auto Test" or "Manual Test".
3. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE INFORMATION -
Fixture Use Time - With this function, you can check the fixture running time.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is higlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Fixture Use Time" is displayed, and press ENTER. The fixture
running time will now be displayed.
3. Press the MENU button to return to the main menu.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 33
Operating Instructions
Advertisement
Table of Contents
