Table of Contents
Advertisement
Vizi CMY300
* * * IMPORTANT NOTICE REGARDING CUSTOM GOBOS * * *
Due to the high temperature optical system, special BOROFLOAT glass material and design requirements
are required.
Due to varying gobo manufacturing processes and tolerances, it is highly recommended to provide a gobo
and gobo holder/wheel sample from the fixture to the custom gobo vendor for accurate sizing. Gobo specifications
below including diameter, thickness, and materials have been tested and are compatible in this fixture.
Using custom gobos that do not match the gobo specifications below, is not recommended and any damage
to the fixture as a result of using a custom gobo is NOT covered under warranty.
Extended testing of custom gobo designs is highly recommended prior to using.
PLEASE CONTACT ADJ CUSTOMER SUPPORT FOR FURTHER INFORMATION.
MAX THICKNESS
GOBOS 1,2,3,5,6,7 ARE SECURED IN THE GOBO HOLDER WITH A
RETAINER SPRING AND HIGH TEMPERATURE SILICONE SEALANT.
GOBO 4 IS SECURED WITH A HIGH TEMPERATURE SILICONE SEALANT
ONLY, NO RETAINER SPRING.
NO METAL BEZELS ARE USED TO SECURE ANY OF THE FACTORY GOBOS.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 40
MAX O.D.
MAX I.D.
O.D.
(Max. Outer Diameter)
I.D.
(Max. Image Diameter)
Gobo Holder
Diameter
Thickness
BOROFLOAT GLASS
Material
Gobo Specifications
*GOBO HOLDER
26.8mm -0.15mm
20mm
27.0mm -0.05mm
1.1mm ±0.1mm
Advertisement
Table of Contents
