Installing the module control
Restarting the module control communication
After changing the installation status (changing the number of the installed DVM CHILLERs
or their numbers or resetting the group/module) of DVM CHILLERs, the module control
communication must be restarted.
+
y The module control communication will be restarted and tracking of the DVM CHILLERs
y
connected to the module control will be performed again.
Module control error display
The display will show an error code of DVM CHILLERs connected to the module control, and
located on top part of the display and red LED will be blinking.
When an error occurs in DVM CHILLER (Product group display : A)
The DVM CHILLER's number for the error will be displayed, followed by the error code.
y Example) When error 101 occurs from DVM CHILLER No. No. 200100 (Unit No. 01)
y
12 English
SOL MODULE CONTROLLER_IM_05747A-00_EN.indd 12
Press for over 5
seconds.
2016-01-20 오후 12:00:20