Names And Functions; Controlling Ptz Camera; Power; Initial Screen Display - Samsung SPC-1010 User Manual

Names and Functions

① ②
③ ④
ESC / POWER Cancels a command or turns power on/off.
①
② LCD DISPLAY 16 X 2 LCD
③ Number Pad Enables changing channels or opening and closing the camera OSD.
1. LOCK Locks out the system.
2. FN Function keys: Perform special functions in combination with other buttons.
3. AUX Controls the camera's AUX output.
④
4. SET Enters the controller settings menu.
5. OPEN IRIS OPEN
6. CLOSE IRIS CLOSE
1. P-SET Sets up and moves to preset locations.
2. SWING Commands the camera to move between 2 selected locations while
panning or tilting.
3. GROUP
⑤ Commands the camera to monitor preset locations at a selected speed
and standby time in an orderly manner.
4. A/F
Performs the One-Shot AF function.
5. OSD Indicates the camera's OSD menu.
1. FOCUS -/+ Manually focuses the camera.
⑥
2. ZOOM W/T Zooms the camera in or out.
8
PTZ CONTROLLER
⑤
⑥
User Guide

Controlling PTZ Camera

1. Power

To turn on the power, press the PWR button.
①
To turn off the power, hold down the PWR button.
②

2. Initial Screen Display

ID : Indicates the current channel number.
①
SAMSUNG-T : Indicates the current channel camera protocol.
②
9.6k : Indicates the current channel camera baud-rate.
③

3. Camera ID Setup

Using the number pad, enter a number.
①
Press the ENT button to confirm the Camera ID.
②
• Camera IDs are between 1 to 255.
PTZ CONTROLLER
SAMSUNG-T
9
User Guide