Table of Contents
Advertisement
WWW.SEAGULLMODELS.COM
INSTALLING THE FLAP SERVO.
Repeat the procedure for the flap servo.
9) Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
INSTALLING THE LIGHT COVER.
.
Please see below pictures.
2x10mm
INSTALLING THE AILERON SERVO.
Repeat the procedure for the aileron
servo.
17 17
Advertisement
Table of Contents
Need help?
Do you have a question about the T-34C MENTOR and is the answer not in the manual?
Questions and answers