Table of Contents
Advertisement
Use a felt tip pen to mark the wire where
it crosses the hole. Use a pair of pliers to
put a shrp 90-degree bend in the wire at
the mark.
Bend at the mark
M2 lock nut.
8mm
Snap keeper.
Servo arm.
Snap keeper.
Fuel tubing.
WWW.SEAGULLMODELS.COM
Mark.
Metal clevis.
Nylon Snap keeper.
Hex Nut.
INSTALLING THE FLAP PUSHROD.
Repeat the procedure for the aileron
pushrod.
STANDARD FIXED LANDING GEAR.
Please see below pictures.
Cut.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the T-34C MENTOR and is the answer not in the manual?
Questions and answers