Installing And Removing The Cross-Piece; Removing The Cross-Piece; Installing The Cross-Piece - Fujitsu PRIMERGY MX130 S1 Operating Manual

System expansions

Installing and removing the cross-piece

► Open the casing (see "Opening the casing").

Removing the cross-piece

a

Installing the cross-piece

► Close the casing (see "Closing the casing").
42
►
►
►
a
Lift off the cross-piece in an upward
direction at the marking (a) in the direction
of the arrow.
Insert the cross-piece into its guide
lugs (a) on the front of the casing at an
angle from above.
Press the cross-piece downward in the
direction of the arrow until it rests on the
casing and engages.
Fujitsu Technology Solutions