Parameterizing The Device; Submenu "Set Corr": Offset/Zero Point Correction And Slope Correction Of The Voltage And Temperature Measurement - JUMO 202710 Operating Manual

8.4

Parameterizing the device

8.4.1 Submenu "SEt Corr": offset/zero point correction and slope cor-
rection of the voltage and temperature measurement
Overview of the parameters
After calling up the setting menu with
"SEt Corr", use
ATC
(3)
(4)
(3)
(4)
Parameter "OFFS": offset/zero point correction of the voltage measurement
Use the
Menu/parameter
ATC
Press the
press the
setting menu or
press the
measurement mode.
All manuals and user guides at all-guides.com
to select the parameter to be configured.
rH mV mV pH
H
CAL
3
ok CAL AL Logg pH
Parameters
"OFFS mV": offset/zero point correction of the voltage measurement, See
page 41
"SCAL mV": slope correction of the voltage measurement, See page 42
"OFFS °C": offset/zero point correction of the temperature measurement, See
page 42
"SCAL °C": slope correction of the temperature measurement, See page 43
and keys to set the zero point correction:
Setting option
oFF
rH mV mV pH
H
-
10.0 to +10.0 m
V
ok CAL AL Logg pH
key to save the setting and move to the next parameter or
key to save the setting and move to the next submenu of the
key to save the setting, quit the device settings, and return to
8 Device settings
and selecting the submenu
(1) (4)
mV
(2) (3)
mV
Meaning
no zero point correction of the voltage
measurement
zero point correction of the
voltage measurement in mV
41