Bdt Function; Stopping Automatic Operating - Adtech 4 Series Installation And Maintenance User Manual

Hide thumbs Also See for 4 Series:

Table of Contents

5.7 BDT function

at auto mode, press [BDT] to start the BDT function, which will make the instructions invalid, the

instructions are that hace a

Two methods are available to stop automatic operating,one is that when the controller exctue M01 or

M00 code,the other is that press stop key on the panel

Program stops

After executing M00 or M01 code, the controller stop automaticly, which is same as SBK

function,after press [start],the controller continue working

After finish a work piece ,the controller stop automaticly

Program ends

After executing M30, the controller stop automaticly, and returns to program start.point

Feeding pause

During automatic operation, press the [Pause] key on the operation panel, the automatic operation

pauses and the indicator is on; press [Start] again to continue working and the pause indicator is off

Reset

During automatic operation, press the [Reset] key on the operation panel and the system stops

immediately. Here, [Reset] is same as emergency stop button.

symbol at the begaining of program segments.

Table of Contents