Automatic Lubrication Function - Adtech NCT-04 User Manual

Blanking detection time ms

3.4 Automatic Lubrication Function

System integrates two sets of automatic lubrication systems, progressive and displacement;
3.4.1
Progressive
Parameter
A: lubrication cycle
B: lubrication time
C: lubrication output port
D: lubrication detection input port
E: lubrication oil pressure detection level
A: lubrication cycle, B: lubrication time, C: lubrication output port and D: lubrication detection input port (if
lubrication pulse signal is not detected within the specified time, the lubrication indicator will flash and alarm)
If P1.052 is non-zero, the system automatically starts lubrication
Note:
If no alarm is detected by the lubrication detection port, press and hold "Cancel" to clear;
Set P5.061 to 8888 to shield the alarm;
3.4.2
Displacement
Parameter
A: lubrication cycle
B: lubrication time
C: lubrication output port
D: lubrication detection input port
E: lubrication oil pressure detection level
A: lubrication cycle, B: lubrication time, C: lubrication output port and D: lubrication detection input port (if
lubrication pulse signal is not detected within the specified time, the lubrication indicator will flash and alarm)
Note: If P1.137 is non-zero, the system automatically starts lubrication
If no alarm is detected by the lubrication detection port, press and hold "Cancel" to clear;
Set P5.062 to 8888 to shield the alarm;
NCT-04/03/02 Punch CNC System (Commissioning Manual)
Unit: ms; alarm and pause if not detected within this time
P1.052
P1.053
P5.023
P5.061
P1.055
P1.137
P1.138
P5.062
P5.062
P1.140
Description
Description