Advertisement
the starting point, in order to ensure the correct position. Back to the starting point of
the process is the first back to zero, and then to the starting point. High requirements
to perform, to ensure safety.
Fill holes: beat the current hole is required to perform at a high level, to ensure safety.
Location: can be positioned directly to the desired holes required to perform at a high level, to
ensure safety.
The hole: a hole to the motion, if the starting point is not moved.
Lower hole: move to the next hole, if you move to the starting point at the last hole.
Track Function
1.2.2.2
Preview: The current product distribution holes.
Tracking: Auto Tracking the current machining holes in the process.
Axis selection: You can select any two axes XYZ axis of the graphic display.
Direction: You can select the current direction of two axes.
Color: The system provides two-coat process, each coat can select eight different colors, as
follows:
Advertisement
