Table of Contents
Advertisement
Chapter 5
Table 8: Screw Terminal Assignments for Connector J3 on the STP268-EC
TB
J3 Pin
#
#
61
22
63
16
65
10
67
4
a. Jumper W3 must be installed on the STP268-EC. If this jumper is not installed, this signal is not
available through this connector.
b. Jumper W2 must be installed on the STP268-EC. If this jumper is not installed, this signal is not
available through this connector.
c. Jumper W1 must be installed on the STP268-EC for DAC0 Ground; jumper W4 must be
installed on the STP268-EC for DAC1 Ground. If these jumpers are not installed, this signal is
not available through this connector.
d. If jumper W3 is installed on the STP268-EC, this signal is not available through this connector.
e. If jumper W2 is installed on the STP268-EC, this signal is not available through this connector.
62
SIgnal Description
d
Analog Input 15
Analog Input 07 Return
Analog Input 13/
Analog Input 05 Return
Analog Input 11/
Analog Input 03 Return
Analog Input 09/
Analog Input 01 Return
TB
J3 Pin
#
#
Signal Description
62
20
Analog Input 14
Analog Input 06 Return
64
14
Analog Input 12/
Analog Input 04 Return
66
8
Analog Input 10/
Analog Input 02 Return
68
2
Analog Input 08/
Analog Input 00 Return
e
/
Advertisement
Table of Contents
