Table of Contents
Advertisement
Unpacking
Open the shipping box and remove the wrapped DT3010 Series
board.
Keep the board in its protective antistatic bag until you are ready to
install it; this minimizes the likelihood of electrostatic damage.
Verify that the following items are present:
• DT3010 Series data acquisition board, and
• Data Acquisition OMNI CD.
If an item is missing or damaged, contact Data Translation. If you are
in the United States, call the Customer Service Department at (508)
481-3700. An application engineer will guide you through the
appropriate steps for replacing missing or damaged items. If you are
located outside the United States, call your local distributor, listed in
your Data Translation Product Handbook.
Once you have unpacked your board, check the system requirements,
as described in the next section.
Preparing to Use a DT3010 Series Board
CAUTION:
2
2
2
2
2
2
2
2
2
7
Advertisement
Table of Contents
