Table of Contents
Advertisement
This manual describes how to set up and install the following
components:
• DT3010 Series software,
• DT3010 Series board,
• DT3010 Series Device Driver, and
• DT740, STP268, or STP268-EC screw terminal panel.
It also describes how to wire signals to the board and how to verify
the board's operation using the Quick Data Acq application.
Intended Audience
This document is intended for engineers, scientists, technicians, or
others responsible for setting up a DT3010 Series board to perform
data acquisition operations. It is assumed that you are familiar with
the requirements of your application. It is also assumed that you are
familiar with Microsoft
Edition), Windows NT
How this Manual is Organized
This manual is organized as follows:
•
Chapter
Series hardware and the DT3010 Series software, and provides an
overview of the DT3010 Series getting started procedure.
•
Chapter
how to unpack the DT3010 Series package, check the system
requirements, install the DT3010 Series software, and view the
DT3010 Series documentation online.
About this Manual
Windows 98
4.0, or Windows 2000.
1,
"Overview,"
describes the key features of the DT3010
2,
"Preparing to Use a DT3010 Series Board,"
, Windows Me (Millennium
describes
vii
Advertisement
Table of Contents
