Attaching The Stp268-Ec Screw Terminal Panel - Data Translation DT3010 Series Getting Started Manual

DT3010-268 Board
Connector J2
EP324 Cable
Figure 6: Attaching STP268 Screw Terminal Panels to the

Attaching the STP268-EC Screw Terminal Panel

Only the STP268-EC screw terminal panel supports Analog Devices
5B Series backplanes, 7B Series backplanes, and the AC1324 screw
terminal panel, as well as the Opto-22 PB16H digital I/O backplane.
The STP268-EC provides the following four connectors:
• Connector J1 − Attaches to the 68-pin connector of the
DT3010-268.
• Connector J2 − Supports the PB16H digital I/O backplane. The
PB16H supports eight digital I/O lines.
• Connectors J3 and J4 − Supports 5B and 7B Series backplanes or
an AC1324 screw terminal panel for analog input connections.
Figure 7 shows the location of these connectors on the STP268-EC
screw terminal panel.
Attaching and Configuring a Screw Terminal Panel
Connector J1
EP325 Cables
DT3010-268 Board
J1
STP268 Screw
Terminal Panel
J1
STP268 Screw
Terminal Panel
4
4
4
4
4
4
4
4
4
31