Setting Up The Computer - Data Translation DT3010 Series Getting Started Manual

Setting up the Computer

To prevent electrostatic damage that can occur when handling
electronic equipment, use a ground strap or similar device when
performing this installation procedure.
To set up the computer, perform the following steps:
• Turn off the computer.
• Turn off all peripherals (printer, modem, monitor, and so on)
connected to the computer.
• Unplug the computer and all peripherals.
• Remove the cover from you computer. Refer to your computer's
user's manual for instructions.
Installing the Board and Loading the Device Driver
CAUTION:
3
3
3
3
3
3
3
3
3
15