Table of Contents
Advertisement
DT3010 Series Software
The DT3010 Series software includes the following software
components, which are shipped on the Data Acquisition OMNI CD:
• DT3010 Series Device Driver − You must install and load the
device driver to use a DT3010 Series board with any of the
supported software packages or utilities.
• The Quick Data Acq application − This application provides a
quick way to get a DT3010 Series board up and running. Using
the Quick Data Acq application, you can verify the features of the
board, display data on the screen, and save data to disk.
• Calibration Utility − This utility allows you to calibrate the
analog I/O circuitry of the board. Refer to the DT3010 Series
User's Manual for information on using this utility.
• DT3010 Series User's Manual (in PDF format) − This manual
describes the features of the DT3010 Series boards and how to use
the DT3010 Series Device Driver with DT-Open Layers-compliant
software to write an application program.
• This manual (in PDF format).
• Rev 4.0 of Adobe Acrobat Reader − Allows you to view and
print the PDF files.
Refer to
page 9
for information on installing the software.
Overview
1
1
1
1
1
1
1
1
1
3
Advertisement
Table of Contents
